Bio-Plastic Topsheet – One of the materials we use in our quest to eliminate harmful petroleum-based plastics from our production cycle. Made from CastorBean Oil, this eco-topsheet is extremely durable and water repellent.
RAP Topsheet – A build process in which we eliminate the need for our Bio-Plastic Topsheet, creating a lighter, more eco-friendly ride.
FSC Certified Single Malt Core - Our standard wood core constructed with 100% sustainably grown Poplar for highly reliable return and long-lasting durability.
FSC Certified Highland Core - Our most versatile core, constructed with a 1:2 Poplar to Paulownia blend for super lightweight performance, durability, and return.
FSC Certified Highland II Core - A newly developed screening process has allowed us to hand-select the very lightest and highest quality Paulownia from our sourcing partners. The result is a lighter, more responsive version of our FSC Certified Highland Core known for highly reliable return and long-lasting durability.
FSC Certified Double Barrel Core – Poplar to Paulownia blend with bamboo stringers running down the center of the board for added longitudinal pop and unmatched board control.
FSC Certified Double Barrel II Core – A progressive 1:2 Poplar to Paulownia blend with bamboo stringers running along the rails of the board for added torsional response and improved board control.
FSC Certified Highland Split Core – Our highly versatile FSC Certified Highland Core, with additional insert and centerline components for a premium factory splitboard.
Extruded Base – A tough, user–friendly extruded base that delivers ease of repair.
Sintered Base - A higher molecular weight, sintered base that provides added durability and speed.
Sintered+ Base - An advanced process creating the highest density base material and fastest base that Arbor offers.
Biax Glassing - A biax over biax lay-up that’s designed for park and street inspired all-mountain riding. Also creates a good platform for learning.
Mixed Glassing - A triax over biax lay-up that’s best for versatility: pow, backcountry, groomers, jumps, & more.
2x4 10 Pack Inserts
2x4 12 Pack Inserts
2x4 14-Pack Inserts - Provide a wide stance range, while at the same time delivering critical micro adjustability.
Universal Splitboard Insert Packs
2 cm Tapered Tail – A shaping technique that narrows the profile of the snowboard towards the near contact points. Tapered snowboard will have a wider nose and narrower tail, allowing the tail of the board to sink in deeper snow creating natural float and cleaner tracking
5 cm Tapered Tail – A shaping technique that narrows the profile of the snowboard towards the near contact points. Tapered snowboard will have a wider nose and narrower tail, allowing the tail of the board to sink in deeper snow creating natural float and cleaner tracking.
Pow Tech – By eliminating the front two GripTech contact points and moving the board's primary interface with the snow under your back foot, we are able to deliver powder specific performance driven by the power of your back leg.
Grip Tech – Grip Tech creates added heel and toe contact points that dramatically improve edge control on snow and ice. The design creates a more ergonomic and direct connection to the snow for substantially improved handling and response time. The added contact points make it possible for Arbor to offer Rocker designs that hold an amazing edge, and Camber designs that provide cleaner edge performance.
Flip Tips – Increased ramping on the nose and tail of the snowboard create the perfect platform for catch free nollies and fakie ollies.
Pow Fenders – Oversized Up-Rise Fenders that pull the outside contact points up off the snow, creating smooth turning and extra float.
Uprise Fenders – 3 degrees, Deep Snow Performance, Maximum Float
Offset Fenders – 3 degrees Nose / 1.5 degrees tail, Deep Snow / All Mountain, Maximum Float and Stability
4 Point – 1.5 degrees, Park/Street Performance, Built in 1° De-Tune
Cross Vector Netting - Our newly developed Carbon Vector Net reinforcements create evenly distributed torsional power and accelerated response from tip to tail.
Carbon Uprights - Two carbon fiber uprights running from the tip and tail to just past the inserts. A set up that provides added landing durability and pop for bigger park and backcountry performance.
AWD Carbon A-Frame Board Reinforcement - A carbon fiber insert from the contact points to the inserts. Creates structural a-frames for improved torsional performance in the steeps and at speed, without negatively affecting high speed turn initiation.
RWD Carbon A-Frame Board Reinforcement - Diagonal carbon fiber inserts running diagonally from underneath your back foot to the outside contact point increase snap and rebound under your dominant back foot for powerful drive and power transfer.
A 360 degree, fully wrapped sidewall that eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
Recycled Steel Edges – Our highly durable, recycled steel edges embody two of our Arbor’s key values: Quality and Sustainability.
Bio Resin – Starting with our 2020 line we are proud to announce that all Powerplys and R.A.P. Topless Tech veneers will be made with Bio-Resin, a replacement for traditional petroleum-based resin that doesn’t affect performance or usability. The ingredients that go into Entropy Bio-Resin are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% (when compared to its petroleum-based equivalent).
Three Year Warranty – We stand behind the quality and construction of every Arbor Snowboard with an extended 3-year warranty. For more information on our warranty policy, please Click Here
Wend Natural Wax – All Arbor Snowboards hit the shop floor ready to ride with Wend Natural Wax.
Factory Tuned– We detune the tip and tail contact points on all of our snowboards for a catch-free ride before they leave the factory.
Zero Waste Base Technology – All of our die-cut bases feature our Zero Waste Base technology, and come in 2 interchangeable colorways. This process is essential to reducing our carbon footprint and eliminating waste during the manufacturing process.
Karakoram UltraClip - Karakoram’s new and improved splitboard clip is powerful, easier to use, and lighter. Once joined, the UltraClip fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. The lever locks in the touring position as well to eliminate unwanted movement on the ascent.
Recycled ABS – When a plastic alternative is unavailable, as in the case of ABS sidewalls, we do our best to opt for a recycled material to improve the sustainability of our products.
FSC Certified - FSC certification ensures that products come from responsibly managed forests that provide environmental, social and economic benefits.